Woman in straw hat smiles, holding wine glass near a lake.

Protect and Restore Your Exterior Wood Surfaces

Professional wood staining services for decks, fences, and exterior wood throughout Manhattan, Kansas.

Exterior wood in Manhattan fades quickly under direct sunlight, absorbs moisture during storms, and starts to crack or splinter when it is left untreated. Staining protects the wood from those conditions while bringing out the natural grain and giving your deck or fence a finished look that lasts longer than bare lumber ever will.

Dunns Painting & Remodeling LLC applies professional-grade stains to decks, fences, railings, pergolas, and any other exterior wood surface that needs protection or a refresh. The process includes cleaning the wood, sanding rough spots, and applying stain in even coats so the finish soaks in properly and stays consistent across the entire surface. The result is wood that resists moisture, holds its color, and does not deteriorate as quickly from sun exposure or temperature changes.

If your deck or fence in Manhattan needs staining or restaining, get in touch to discuss the project and schedule a consultation.

How the Surface Gets Prepared and Finished

The work starts with cleaning the wood to remove dirt, mildew, and old stain that has worn away or peeled. Power washing is used in most cases, followed by sanding to smooth splintered areas and open the grain so the new stain absorbs evenly. Once the surface is dry, the stain is applied with brushes or sprayers depending on the wood type and the size of the area being treated.

After staining is complete, the wood no longer looks gray or weathered, and the grain shows through with richer color and depth. The surface repels water instead of soaking it in, and the wood stays smooth without splintering or cracking as quickly. Stain also blocks UV rays that cause fading, so the finish holds its appearance longer between maintenance cycles.

Staining is often paired with deck construction or fence repairs, and it can also be done as a standalone service when existing wood needs protection or a visual update. The stain type is chosen based on the wood species, how much exposure the surface receives, and whether you prefer a solid or transparent finish. Drying time depends on temperature and humidity, but most surfaces are ready for light use within twenty-four to forty-eight hours.

These are the details homeowners usually ask about

These questions come up regularly when planning wood staining work, especially when prep, timing, and long-term upkeep are part of the conversation.

What type of stain is used for exterior wood?
Professional-grade stains designed for outdoor use and moisture resistance are applied. The specific product depends on the wood type, finish preference, and how much sun or weather exposure the surface receives.
How often does wood need to be restained?
Most exterior wood should be restained every two to three years depending on exposure and wear. Horizontal surfaces like decks typically need it more often than vertical surfaces like fences.
What prep work is required before staining begins?
The wood is cleaned with power washing to remove dirt and old stain, then sanded to smooth rough areas and open the grain. The surface must be completely dry before stain is applied.
How long does the stain take to dry?
Most stains are dry to the touch within a few hours, but full curing takes twenty-four to forty-eight hours depending on temperature and humidity. You should avoid heavy use or placing furniture on the surface until it is fully cured.
Can staining be added to a new deck build?
Yes, staining is often included as part of deck construction once the wood has dried and is ready for finishing. It can also be scheduled separately if the deck needs time to settle or if weather delays the staining process.

Dunns Painting & Remodeling LLC provides wood staining with proper prep and application for decks, fences, and exterior wood throughout Manhattan. If your wood surfaces need protection or a refresh, contact us to review the project and schedule the work.